How to Paint Dresser to Red From White

Now, that I have posted our Home Tour:  Coastal Farmhouse Master Bedroom , it is time to share my  white-washed dresser makeover with you – woohoo!!   It's about time – right?   I know lots of you have been wanting to learn how to white-wash furniture, so this tutorial will give you everything you need to know.  Plus, this is a budget-friendly way to update an existing piece of furniture (even better).  So, let's get to it!!  Painting 101:  White-Washed Dresser Tutorial.

If you want to see my white-washed bed click or glazed white nightstands click:

• Master Bed Frame Makeover:  Painted White
• Nightstands Makeover:  Painted White with Black Top.

***NOTE***This post contains affiliate links which means that I will receive a small compensation if you purchase something from these links.  See my privacy and disclosure policies below for more info.  Thanks for your support.***

---

Painting 101:  White-Washed Dresser Tutorial

What is the white-washed technique?

So, what is the white-washed technique anyway?

• It's basically a painting method that allows you to see part of the furniture peeking through (like you "wiped" something off with a rag, but the rag left some of the liquid behind).

This leftover "residue" would be "streaked" because of the motion of the rag (washed), giving it a "dulled or milky" appearance.

Does that make sense?

Then how do you get this look?

---

2 Ways To Get The White-washed Look

#1) White-Washed Method:

In this method, the paint is diluted with water to make it runnier;  therefore, making it easier to wipe off with a rag.

• The paint mixture is usually 3 parts paint to 1 part water ratio (3:1 ratio).
• This technique works best when you are trying to "barely" change the color of the wood.

 It will basically "lighten" the existing wood tone.  The more coats you put on, the less wood that shows through.

• The cons of this method is that it is VERY messy, and also VERY time consuming if not done correctly.

Thus….. alternate method #2 – dry-brushing.

#2) Dry-Brushed Method:

This is the method that I use most often to get the white-washed look.

• In this method, you will not dilute the paint with water but you will use a rag to get the excess paint off of your brush.

Basically, you are working with a "DRY-BRUSH" (one with little paint on it) – get it?

• You dip your paint into the paint can, get a SMALL amount of paint onto the brush, then WIPE OFF the excess paint each time.

This dry-brush (with little paint on it) allows the paint to come out in "streaks."

***I will explain more below when you can see the pictures, but I just wanted to give you a brief description.***

---

Painting 101:  White-Washed Dresser Tutorial

Supplies:

• Primer – I use zinsser, or here
• White Paint – I used Behr Swiss Coffee (Satin) – Home Depot
• Clear Wax – I use trewax
• Paint Brush – I prefer 2″ angled (angled gets into the grooves better)
• 150-grit Sandpaper or Sponge -to distress dresser
• Rags/Old Shirts – to wipe off wax
• Canvas Dropcloth or Plastic – to protect floor
• Oil- Rubbed Bronze Spray Paint– for hardware

---

8 Steps: White-Washed Dresser Tutorial

1. Prep Dresser & Area
2. Prime Dresser
3. Paint Dresser – 2 coats
4. Spray Paint Hardware
5. Wax Dresser
6. Distress Dresser (optional)
7. Wax Dresser Again
8. Put Hardware Back On

So, here it is – before picture.

---

STEP 1:  PREP DRESSER & PAINTING AREA

Remove all of the hardware from your dresser, and wipe down dresser with a rag.  Make sure to wipe down all of the drawers and inside the dresser also.

Set up your canvas or plastic drop cloth, and make sure you are in a well ventilated area (like outside or in your garage).

Prop your dresser up onto wooden blocks or paint cans to lift it off of the ground.  You do not want it sitting directly on your painting surface.

Obviously……I needed to put down something in my garage -picture above – but I've painted so many pieces that I got lazy.  DON'T BE ME – lol!!

NOTE:  I did not sand this piece down (prior to painting) because my primer bonds really well to the furniture surface.  You can sand it down first if you choose…but why do the extra step if you don't need to -haha!!

If you just feel like you need to sand it down, then I would recommend sanding down the top part only.

---

STEP 2:  PRIMING

Put a small amount of primer onto your paint brush, wipe off excess onto rag and begin gently brushing your primer onto your dresser.

You will need several rags for this process, as the paint will begin to soak through.

***TIP***The less paint you put onto the brush, the less messy it will be.  HINT-HINT!

See pictures below.  Here is what the priming stage looks like.

***TIP***  Use long, quick brush strokes and make sure to gently brush the primer on.  You will not want to fully cover your piece – should look streaked like these pictures.

FULLY PRIMED

FULLY PRIMED CLOSEUP

Why am I showing so many pictures?  LOL!!  Once you get this priming stage done, the painting steps are much easier.

Plus I just wanted to stress that you are "not fully" covering your piece with paint – just streaks of paint.

***LET DRY OVERNIGHT***

---

STEP 3:  PAINTING (2 COATS)

Now you will do the exact same method, but just using your white paint.  I used Behr Swiss Coffee from Home Depot for my white paint color.

Dip your brush into the paint, wipe off excess with rag, then gently brush on.  You will do TWO coats of this method.

***LET DRY OVERNIGHT – BETWEEN 2 COATS***

Here it is with the primed picture compared to the painted (2 coats) picture.  I just wanted you to be able to see the difference.

***LET DRY OVERNIGHT***

---

STEP 4 – PAINTING THE HARDWARE PULLS

While you are waiting for the dresser to dry, go ahead and prep area to paint your hardware.  Put plastic down on the ground, and lie your hardware onto wooden blocks or cardboard.

I always use wooden pieces from leftover projects (can you tell – lol) for mine, but just use something to lift them above the plastic.

Spray your hardware making sure to get the inside areas as well.  Wait at least 30 mins then flip them over and spray the back side.  Once again, make sure to get "all" areas of the hardware.

***TIP***  I spray all sides from the left, then spray from the top, then spray from the right, and then from the bottom.  This way, I make sure I don't miss any of the spots.  Trust me, it is the worst feeling EVER!! to finally think you have finished your painted dresser, ONLY to realize that 2 or 3 of the hardware pulls did not fully get covered – ugh!!  Out comes the plastic, spray paint, clean up, and TIME – all again.  Make your life easier by just doing it right the first time!!

Here are some closeup pictures so you can see the brass color of the original hardware (left below) and then the oil-rubbed bronze color after it is spray painted.

***TIP***  If you have brass hardware and spray them with either bronze or black paint, you can gently sand down the edges of the pulls to get an antiqued look (the brass peaks through).

This turns out REALLY pretty!!  I've done it many, many times – I just wasn't going for that "antique-y" look on this particular piece.  Give it a try if that's what you're going for.

Flip them over one more time (top side up), and gently spray again.  This will ensure that ALL sides are covered.

***LET DRY OVERNIGHT***

---

STEP 5 – WAXING DRESSER

Put the 1st coat of wax on with the sponge that's included (or rag), let sit at least 15 minutes, and wipe off to buff.  This stage is always where the magic happens – am I right?

It's like the wax joins everything together, and makes it look a-ma-zing!!

***LET DRY OVERNIGHT***

---

***STEP 6 – GENTLY SAND (DISTRESS) DRESSER (OPTIONAL)***

Use the 150-grit sandpaper to lightly distress areas of the dresser where normal wear and tear would occur naturally over time.

I distressed my dresser on random places at the feet, on edges of some of the drawers,  and on the top section and edge(rim).

---

STEP 7 – WAX AGAIN

Repeat the same process again with the wax for the entire dresser.  Let dry overnight.

Then put ONE more coat of wax on the TOP portion only.

So the entire dresser will have 2 coats total, and the TOP portion will have 3 coats total.

***LET DRY 2 DAYS BEFORE PUTTING DECOR ON TOP***

---

STEP 8 – PUT HARDWARE ON

AND YOU ARE DONE!!  WOOHOO!!

---

***LET DRY 2 DAYS BEFORE PUTTING DECOR ON TOP***

To see more of our master bedroom makeover and master bathroom makeover click:

• Master Bath Remodel:  Hardware Accessories
• Shower Remodel Design Guide:  10 Things You Must Know

Have any questions?  I'd love to help out any way I can.

• Will you paint your bedroom furniture or try another piece to white-wash?
• Let me know – I can't wait to see the pictures of how beautiful it turns out!!

Have a Great Weekend!!

Love & Hugs 🙂

Recommended Posts:

Painting Lamp Shades Black:  Do's and Don'ts

Faux Bamboo Mirror Makeover (Gold Spray Paint)

Whitewash Furniture DIY:  Coffee Table Makeover

Home Tour:  Summer Dining Room

My Easter Tablescape:  Blue & Yellow

12 Best Modern Farmhouse Bar Stools

55 Incredible Barn Door Ideas:  Not Just For Farmhouse Style

How to Plan Your Kitchen Remodel:  Tips & Ideas

15 Top-Rated Round Mirrors:  Find Your Style

pittsjoatmettly.blogspot.com

Source: https://thetarnishedjewelblog.com/2019/03/16/painting-101-white-washed-dresser-tutorial/

Share this post